Could pooled samples method affect SARS-CoV-2 diagnosis accuracy using BGI and Sansure-Biotech RT-PCR kits used in Gabon, Central Africa?

This study aims at establishing specimens pooling approach for the detection of SARS-CoV-2 using the RT-PCR BGI and Sansure-Biotech kits used in Gabon. To validate this approach, 14 positive samples, stored at -20°C for three to five weeks were analyzed individually (as gold standard) and in pools of five, eight and ten in the same plate. We created 14 pools of 5, 8 and 10 samples using 40 µL from each of the selected positive samples mixed with 4, 7 and 9 confirmed negative counterparts in a total volume of 200 µL, 320 µL and 400 µL for the pools of 5, 8 and 10 respectively. Both individual and pooled samples testing was conducted according to the BGI and Sansure-Biotech RT-PCR protocols used at the Professor Daniel Gahouma Laboratory (PDGL). Furthermore, the pooling method was also tested by comparing results of 470 unselected samples tested in 94 pools and individually. Results of our experiment showed that using a BGI single positive sample with cycle threshold (Ct) value of 28.42, confirmed by individual testing, detection occurred in all the pools. On the contrary samples with Ct >31 were not detected in pools of 10 and for these samples (Ct value as high as 37.17) their detection was possible in pool of 8. Regarding the Sansure-Biotech kit, positive samples were detected in all the pool sizes tested, irrespective of their Ct values. The specificity of the pooling method was 100% for the BGI and Sansure-Biotech RT-PCR assays. The present study found an increase in the Ct values with pool size for the BGI and Sansure-Biotech assays. This trend was statistically significant (Pearson's r = 0.978; p = 0,022) using the BGI method where the mean Ct values were 24.04±1.1, 26.74±1.3, 27.91±1.1 and 28.32±1.1 for the individual, pool of 5, 8 and 10 respectively. The testing of the 470 samples showed that one of the 94 pools had a positive test similar to the individual test using the BGI and Sansure-Biotech kits. The saving of time and economizing test reagents by using the pooling method were demonstrated in this study. Ultimately, the pooling method could be used for the diagnosis of SARS-CoV-2 without modifying the accuracy of results in Gabon. We recommend a maximum pool size of 8 for the BGI kit. For the Sansure-Biotech kit, a maximum pool size of 10 can be used without affecting its accuracy compared to the individual testing.

Emergence of B.1.1.318 SARS-CoV-2 viral lineage and high incidence of alpha B.1.1.7 variant of concern in the Republic of Gabon.

OBJECTIVE: Variants of concern (VOCs) associated with relatively high transmissibility appear to be rapidly spreading in Gabon. Therefore, it is imperative to understand the distribution of several VOCs in the population, which could have implications for transmissibility and vaccine efficacy. METHODS: Between February and May 2021, SARS-CoV-2 genomes were sequenced using the Oxford nanopore MinION method and the respective genome diversity was elucidated. Phylogenetic analysis was performed and genomes were classified using pangolin lineages. RESULTS: The results highlighted an increase (46%) in the alpha VOC (B.1.1.7) in the Gabonese population over the study period. In addition, an increase (31%) in the B.1.1.318 lineage, which is associated with high transmission and impaired vaccine efficacy (D614G+E484K+Y144del), was detected. CONCLUSION: With the second wave ongoing, these findings highlight the need for surveillance of the SARS-CoV-2 genome in the Republic of Gabon and should provide useful guidance to policymakers in selecting an appropriate vaccine for this population.

Unrecognized introduction of SARS-CoV-2 variants of concern to Central Africa: Import and local transmission of B.1.1.7 in Gabon in the very early stage of the variant spread to the African continent.

The rapid spread of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variant of concern with higher infectivity has already resulted in the enormous increase in infection cases worldwide. We report an unrecognized introduction of the variant B.1.1.7 in Gabon in December 2020, which was the initial phase of the variant introduction to Africa. The B.1.1.7 variant was also detected in a hospitalized patient in January 2021, indicating a rapid spread of the variant in Gabon since its first detection. Phylogenetic analysis revealed that the detected B.1.1.7 variants originated from the distinct regions, strongly suggesting that the B.1.1.7 variant had been repeatedly introduced to Gabon since December 2020. These results provide insights on the unrecognized risks of infections with variants of concern, and show the necessity to conduct continuous genomic monitoring for immediate alert and control of novel SARS-CoV-2 variant infections.